Glass Gobo Holder

Incandescent theatrical lights are hot and gel is expensive to replace. City Theatrical Colour Extenders move the gel frame away from the focal plane of the lighting fixture, extending gel life and saving you time and money. Note: We do not recommend the use of 5” long accessories in 50° lens tubes. Loss of light will occur. We do not recommend the use of any accessory in 70° or 90° lens tubes.  Extreme loss of light will occur.

A Drop-In Iris is a simple way of changing the beam size of a fixed focus profile spotlight.  Just drop in an Iris, adjust the handle to change the beam size from fully open to nearly fully closed.

Donuts are used in the colour frame slot of a profile spotlight to sharpen gobo projections. Similar to the way the human eye sharpens focus when it squints, a donut reduces the aperture and sharpens the output of the fixture. There is some reduction in brightness to achieve this increase in sharpness but this is often a trade off that designers are willing to make.

Professional designers know that City Theatrical Standard Half Top Hats can provide better performance than full Top Hats.

Professional designers know that City Theatrical Standard Half Top Hats can provide better performance than full Top Hats.

A Drop-In Iris is a simple way of changing the beam size of a fixed focus profile spotlight.  Just drop in an Iris, adjust the handle to change the beam size from fully open to nearly fully closed.

City Theatrical Standard Top Hats serve two functions in entertainment lighting: To control light spill or to reduce the viewing angle to the lens.

A range of Gobo (or pattern) holders to fit our generic and LED profiles.

City Theatrical Standard Top Hats serve two functions in entertainment lighting: To control light spill or to reduce the viewing angle to the lens.

City Theatrical Beam Benders  allow the light output of a lighting fixture to be located at a right angle to the fixture. A fixture can point horizontally and shoot its light straight down, or can point straight down and output its light horizontally. Designers have many uses for the Beam Bender, including shooting around obstructions, working with low grids in which a fixture pointing straight down would be an obstruction, and on dance sidelight booms to light the maximum of dancers’ legs without lighting the floor.

The Smooth Wash Diffuser allows extra-smooth blending of multiple Source Four LED. The smooth wash diffuser is placed into the gel-frame slot of the lens tube.

Dimmable 12v transformer, for use with Par 16 birdies.