Full Description
A Drop-In Iris is a simple way of changing the beam size of a fixed focus profile spotlight. Just drop in an Iris, adjust the handle to change the beam size from fully open to nearly fully closed.
Similar Products
Full Short Top Hat
City Theatrical Standard Top Hats serve two functions in entertainment lighting: To control light spill or to reduce the viewing angle to the lens.
Source 4 Zoom / Par - Concentric Ring
£4.00 / weekHalf Short Top Hat (Eyelash)
Professional designers know that City Theatrical Standard Half Top Hats can provide better performance than full Top Hats.
Source 4 Donut
Donuts are used in the colour frame slot of a profile spotlight to sharpen gobo projections. Similar to the way the human eye sharpens focus when it squints, a donut reduces the aperture and sharpens the output of the fixture. There is some reduction in brightness to achieve this increase in sharpness but this is often a trade off that designers are willing to make.
Full Long Top Hat
City Theatrical Standard Top Hats serve two functions in entertainment lighting: To control light spill or to reduce the viewing angle to the lens.
Par 64 - Concentric Ring (Short)
£4.00 / weekSource 4 Drop In Iris
A Drop-In Iris is a simple way of changing the beam size of a fixed focus profile spotlight. Just drop in an Iris, adjust the handle to change the beam size from fully open to nearly fully closed.
Metal Gobo Holder
A range of Gobo (or pattern) holders to fit our generic and LED profiles.
Color Extender - Source 4 Standard
Incandescent theatrical lights are hot and gel is expensive to replace. City Theatrical Colour Extenders move the gel frame away from the focal plane of the lighting fixture, extending gel life and saving you time and money. Note: We do not recommend the use of 5” long accessories in 50° lens tubes. Loss of light will occur. We do not recommend the use of any accessory in 70° or 90° lens tubes. Extreme loss of light will occur.
Half Long Top Hat (Eyelash)
Professional designers know that City Theatrical Standard Half Top Hats can provide better performance than full Top Hats.
City Theatrical Beam Bender
City Theatrical Beam Benders allow the light output of a lighting fixture to be located at a right angle to the fixture. A fixture can point horizontally and shoot its light straight down, or can point straight down and output its light horizontally. Designers have many uses for the Beam Bender, including shooting around obstructions, working with low grids in which a fixture pointing straight down would be an obstruction, and on dance sidelight booms to light the maximum of dancers’ legs without lighting the floor.
Glass Gobo Holder
A range of Gobo (or pattern) holders to fit our generic and LED profiles.
ETC S4 LED Smooth Wash Diffuser
The Smooth Wash Diffuser allows extra-smooth blending of multiple Source Four LED. The smooth wash diffuser is placed into the gel-frame slot of the lens tube.