Showtec Net 8/5 sACN / Artnet Gateway 8 Port

The Response SMPTE Gateway brings SMPTE LTC timecode signal to your Eos or Hog4 family console reliably to make sure everything stays on track.

Easy to deploy and maintain ethernet/DMX processor for converting, routing, and merging DMX/RDM data.

10-Port Rack Mount DMX Splitter

The Response SMPTE Gateway brings SMPTE LTC timecode signal to your Eos or Hog4 family console reliably to make sure everything stays on track.

Bar hanging 5-Port DMX Splitter

A 5-Port DMX/RDM Splitter with attached hook clamp.

ETC’s 4-Port Gateways are DMX/RDM distribution devices built using the quality and reliability of ETC’s network infrastructure. These Gateways are perfect for networking systems using the industry standard streaming ACN (sACN) protocol and are compatible with mounting and power supply accessories available for other DMX/RDM gateways. The 4-Port Gateways can transport up to 2048 channels of DMX over Ethernet.

Supplied with 4x XLR5 DMX Outlet Ports

8-port network to DMX converter with support for sACN and Art-Net 1 through 4.

A portable USB to five-pin XLR interface

Bar hanging 5-Port DMX Splitter which supports RDM

The Net3 Show Control Gateway uses bidirectional communication with other network devices to forward MIDI and SMPTE signals over Ethernet removing the restrictions of physical cable length. Built on the reliability and quality of ETC’s Network development, Show Control Gateways are built for the Net3 protocol powered by the industry standard ACN.

The Response MIDI Gateway can send and receive info in all flavors of MIDI: Note, Show Control (MSC), and Time Code (MTC). The Gateway also translates MIDI to and from UDP for ultimate integration with ETC and third-party products.

The Showtec NET-2/5 Pocket nodes are cutting-edge network routing devices which convert Art-Net or sACN to DMX512 and back. The power input can be provided by POE which makes the 12 V power supply superfluous. A maximum of 1024 channels can be transported over a single CAT5. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front. Settings can also be arranged via the web browser possibility, which gives you (remote) access through your computer or laptop and your network. Features Supports Art-Net and sACN protocol 2 universes DMX input or output…

Two 5-Port DMX/RDM Splitters in a single rack unit.