ETC Net3 - Show Control Gateway

Easy to deploy and maintain ethernet/DMX processor for converting, routing, and merging DMX/RDM data.

Bar hanging 5-Port DMX Splitter which supports RDM

The Response SMPTE Gateway brings SMPTE LTC timecode signal to your Eos or Hog4 family console reliably to make sure everything stays on track.

ETC’s 4-Port Gateways are DMX/RDM distribution devices built using the quality and reliability of ETC’s network infrastructure. These Gateways are perfect for networking systems using the industry standard streaming ACN (sACN) protocol and are compatible with mounting and power supply accessories available for other DMX/RDM gateways. The 4-Port Gateways can transport up to 2048 channels of DMX over Ethernet.

Supplied with 4x XLR5 DMX Outlet Ports

10-Port Rack Mount DMX Splitter

The Response SMPTE Gateway brings SMPTE LTC timecode signal to your Eos or Hog4 family console reliably to make sure everything stays on track.

Two 5-Port DMX/RDM Splitters in a single rack unit.

The Showtec NET-8/5 nodes are cutting-edge network routing devices which convert Art-Net to DMX512 and back. A maximum of 4096 channels can be transported over a single CAT5. This makes the NET-8/5 suitable for small to large scale events. The NET-8/5 embeds a built-in network switch to allow it to be used as a Ethernet repeater as well as 8 isolated DMX512 universes which can be used as a input or output. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front. Settings can also be arranged via the web browser possibility,…

Bar hanging 5-Port DMX Splitter

A portable USB to five-pin XLR interface

The Showtec NET-2/5 Pocket nodes are cutting-edge network routing devices which convert Art-Net or sACN to DMX512 and back. The power input can be provided by POE which makes the 12 V power supply superfluous. A maximum of 1024 channels can be transported over a single CAT5. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front. Settings can also be arranged via the web browser possibility, which gives you (remote) access through your computer or laptop and your network. Features Supports Art-Net and sACN protocol 2 universes DMX input or output…

The Response MIDI Gateway can send and receive info in all flavors of MIDI: Note, Show Control (MSC), and Time Code (MTC). The Gateway also translates MIDI to and from UDP for ultimate integration with ETC and third-party products.

8-port network to DMX converter with support for sACN and Art-Net 1 through 4.

A 5-Port DMX/RDM Splitter with attached hook clamp.