The Showtec NET-2/5 Pocket nodes are cutting-edge network routing devices which convert Art-Net or sACN to DMX512 and back. The power input can be provided by POE which makes the 12 V power supply superfluous. A maximum of 1024 channels can be transported over a single CAT5. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front. Settings can also be arranged via the web browser possibility, which gives you (remote) access through your computer or laptop and your network. Features Supports Art-Net and sACN protocol 2 universes DMX input or output…

The Showtec NET-8/5 nodes are cutting-edge network routing devices which convert Art-Net to DMX512 and back. A maximum of 4096 channels can be transported over a single CAT5. This makes the NET-8/5 suitable for small to large scale events. The NET-8/5 embeds a built-in network switch to allow it to be used as a Ethernet repeater as well as 8 isolated DMX512 universes which can be used as a input or output. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front. Settings can also be arranged via the web browser possibility,…

The Stage Blinder 2 DMX is an active version of the already popular Stage Blinder 2.
It has a built-in 1 channel dimmer so that the Stage Blinder can be controlled and dimmed by DMX.

700W Blinder, with 20x MR11 Lamps.

Par 64 offer up to 1000w light with fixed beam, some lamp types have a oval beam which are adjusted by spinning the lamp inside the parcan. CP60 VNSP Lamp – Very Narrow Spot. Beam Angle 9º x 12° approx, with a clear lens, good for really tight spots, thin light beams cutting through smoke or streaking across stage set/cloths. CP61 NSP PAR 64 Lamp – Narrow Spot. Beam Angle 10º x 14° approx, with a softly dappled lens, a good general spotlight of the PAR 64 family producing a tight beam of light This lamp is a useful stage spotlight and makes fairly good…

The Showtec Cameleon Flood 15 Q4 is a 15x 5 watt RGBW LED Flood with IP65 rating, suitable for indoor and outdoor applications. It has a 40° fixed beam angle and features 0 – 100 % dimmer and 0 – 15 Hz strobe effects. The Cameleon Flood 15 Q4 can be controlled manually, via DMX, Master/Slave and IR Remote in either Manual or Auto run mode with many available built-in programs. It comes with a dedicated IP65 power connector and bracket. An infrared remote is optional.

A 1m LED bar with full pixel control, fixed 18° beam angle.

The Showtec Sunstrip LED is the successor of the already popular Sunstrip Active. The Sunstrip LED has five DMX modes: 1, 2, 3, 10 and 20 channel. Next to DMX it can be controlled in Manual, Auto or Master / Slave Mode. The DMX 3 & 5-pin and powerCON in/output make the Sunstrip LED easy to daisy-chain in every setup. Through the Tungsten mode the Sunstrip LED works like conventional bulbs while there is still an option to operate them in Warm white, Cool white or a combination of both. The Sunstrip LED is equipped with two Wall/Floor brackets in…